Concrete Contractors in Royal Palm Beach, FL

If you are comparing concrete contractors in Royal Palm Beach, start with one question: does the contractor know the village's driveway rules? Royal Palm Beach publishes its own driveway standards sheet, and it is more specific than many towns in the county. We pour driveways, patios, pool decks, sidewalks and slabs here, and we plan each one around those standards so the inspection is routine rather than a surprise.

A planned village with a fast growth curve

Royal Palm Beach incorporated on June 18, 1959. Wikipedia says Philadelphia supermarket owners Sam and Hattie Friedland bought about 65,000 acres in the 1950s, and Miami developer Arthur Desser set aside about 4,200 acres for the original development. The village had 475 residents in 1970, 14,589 in 1990 and 38,932 in 2020, with 14,296 housing units.

So most driveways and patios here were poured within the last 45 years, many in the 1980s and 1990s. At that age we usually see corner cracks on driveways, panels that dropped where downspouts empty, and pool decks whose surface has worn or crazed in the sun.

What the village driveway sheet asks for

The village's driveway standards set a minimum 6-inch concrete thickness for the sidewalk within the driveway area and for the part of the driveway in the swale, and a 4-inch minimum elsewhere, with concrete of at least 2,500 psi. Standard widths are 12 feet for a one-car drive and 20 feet for two cars. In the swale, the drive must stay at least 3 feet from the projected property line at the sidewalk, and it may flare to the property line at the street edge.

The sheet also asks for a scaled plan on a survey less than two years old and a Pervious Area Form, because 75 percent of the front yard, or at least 1,000 square feet, must stay pervious or landscaped. That rule affects anyone who wants to widen a driveway. We measure the front yard first, run the numbers with you, and design the widest drive the rules allow.

Get a Free Estimate

Swales, joints and the public walk

The same standards say the driveway in the swale must match the existing swale profile, existing drainage structures and valve boxes must be worked into the new drive, and new sidewalk sections need half-inch expansion joints on both sides with tooled joints that match the existing walk and a cross slope no steeper than 2 percent. Construction cannot change lot grading or drain onto a neighbor. Those are good practices anyway, and we follow them on every pour.

A bird sanctuary with a lot of trees

The entire village is designated a bird sanctuary, and Royal Palm Beach has been a Tree City USA since 1990. Mature canopy is part of what makes the streets pleasant, but roots are also one of the main reasons walks and drives lift here. When a root has heaved a slab, we talk through options that protect the tree where possible, such as rerouting a path or bridging the root zone, rather than just cutting and pouring.

Common Royal Palm Beach jobs

• Driveway replacements that meet the swale and width rules
• Driveway widening within the pervious-area limit
• Patios and pool decks with broom, stamped or textured finishes
• Walkways from the drive to the entry and around the side yard
• Slab repair for sunken, cracked or root-lifted sections

Call (561) 556-9571 to book a visit in Royal Palm Beach.